All You Need to Know Pool Water Level Sensors

While having a pool in your compound is so much fun along with the nice feeling of drenching oneself in cool water, maintenance is critical. Another factor that seems to escape the attention of most people regarding pools is water level management. Pools require a blend of water and it is very advisable not to give a pool too much water or too little water as this affects equipment and may cost a lot of money to repair. Well, that is where pool water level sensors are of importance when it comes to the whole process. These wonderful gadgets afford the necessary luxury of removing some guesswork as one sets the required water level.

What are Pool Water Level Sensors?

A pool sensor is simply a type of switch that controls the water level in your swimming pool without being operated manually. Irrespective of the fact that you have issues with evaporation, or rain or you enjoy using the pool frequently, your pool will be well managed through the water level sensor.

Some Popular Types Include:

• Pool water level float sensors: Not very complex but quite efficient, they employ buoyant floats for alterations in phase levels.

• Pool water level control systems: These are more advanced and have digital monitoring whereby water levels are regulated by the system of flow.

Both types assist in maintaining the water levels inside the pool to safe levels by not allowing water to overflow as well as not reducing the levels to that which would be destructive to the filtration system present in the pool.

Why Will You Need a Pool Water Level Sensor?

Using a pool water level sensor comes with a host of benefits:

 Prevent Equipment Damage: Lack of enough water in the trough also means that the water pump works without water and this is terrible since the pump is likely to overheat, and this is dangerous.

Maintain Pool Chemistry: Since the concentrations depend on the water levels, fluctuations in those levels may cause algae to grow or result in skin rash.

Energy Efficiency: Manual monitoring requires frequent checking of the system which in turn consumes time and resources thus the use of automated sensors.

How Does a Pool Water Level Sensor Function?

The functioning of the pool sensor is quite simple as explained below. Here’s a basic rundown:

• Pool water level float sensors make use of an up-and-down float. For instance, when the float recognizes low water level is near a certain level it sends a signal to the refill mechanisms of the pool.

• As for electric pool water level controllers, these pieces of equipment work with the aid of electric signals and help to monitor the water level in real-time.

Some systems employ the use of a pool water level switch that will hold the water flow once the water reaches the required level of the pool. Another may have a pool water level alarm, which gives you a signal that it is time to add water.

Types of Pool Water Level Sensors

As with any instrumentation, it is possible to obtain different types of water level sensors, all having their benefits.

 Mechanical Float Sensors:

These are the easiest and the cheapest to use. A pool water level float sensor works with the help of a buoyancy mechanism that helps in measuring the level of water in the pool. It can be installed very easily and the best thing is it does not require electricity to operate. It is possible to install these in both, in-ground and above-ground pools and is easily available in the market.

Ultrasonic Pool Water Level Sensors:

This is a high-technology device that can be used to give water levels by the use of sound waves. These systems are very sensitive and in some models, they include a smartphone application for controlling the system. They are suitable when installing difficult installation types like saltwater pools or commercial-type swimming pools where it is important to get the right measurements.

Installation Tips for Pool Water Level Sensors

When it comes to the installation of the pool water level sensor it may sound like a complicated process but it is not. Here are some basic steps:

 Choose the Right Location: Ensure that the system puts the sensor in a position where it will come into direct contact with the water and without obstruction.

Mount the Sensor Securely: Mount the sensor securely by using the mounting tools or brackets that have been offered in the items to be purchased.

Test the System: After siphoning the sensor, try out the sensor by pouring some water and then draining it.

 Calibrate if Necessary: Depending on the type of sensor some of them may require to be set to a particular starting value for it to read appropriately.

Maintenance Tips

It is very simple to look after your pool water level sensor. Most systems require minimal maintenance, but here are a few tips to keep it in top shape:

 • Clean the Sensor Regularly: The use of the STP of the pool is affected by dirt, debris, or algae as it would cause disturbance in the tabulation of the reading. Daily cleaning may affect performance since the device will be new giving it a periodic cleaning to maintain its performance.

• Check the Battery: If the above sensor is powered on the batteries make sure to check and replace the batteries when they are depleted.

• Inspect for Corrosion: Assess the signs of corrosion such as rusting and any signs of tear and wear especially if the pool is a saltwater one.

Best Pool Water Level Sensors on the Market

Ceshiney Water Tank Level Sensor TLC2326-WF-S made it to our list of the top pool water level sensors in the market. This unique gadget guarantees accurate and reliable status of the liquid levels and makes it a perfect tool for monitoring the adequate water levels in swimming pools, septic tanks, and rainwater tanks. There is an added functionality such as measuring distance remotely, Wi-Fi connection, and alerts hence being ideal for home and office use.

A rather salient characteristic of this sensor lies in its large measuring range. The speed of the TLC2326-WF-S is that it can track and measure the liquid levels from 10cm up to 3m and it most ideal to track and monitor pools and tanks of different sizes. What I love about this particular sensor is the fact that no matter the size of the water body in question ranging from a residential pool to a big industrial tank, it can give reliable information. Further, it employs radio frequency signals for sending information to an indicator and covers a distance of up to 600 meters.

Why Do You Need a Pool Water Level Sensor?

One device that you can guarantee will be beneficial to include as part of pool maintenance equipment and tools is the pool-level sensor. Alongside assisting you with that it regulates the water height and also prevents water damage to your pool equipment and ensures water chemistry. So regardless of whether you want a basic float sensor or a more advanced wireless sensor, there is one out there for your pool. Other special aspects, including the possibility of automation, using safety alarms, and compatibility with various kinds of pools, make pool water level sensors convenient to use for pool maintenance.

Conclusion:

Using our pool water level sensors, Ceshiney will help any pool to monitor the level of water efficiently and effectively, thus keeping it at the most appropriate level required. Whether it is an in-ground pool sensor, above-ground pool, or hot tub, Ceshiney offers the most up-to-date benefits from the simplest monitoring and control technology. Get Ceshiney pool level sensors today and introduce efficiency and automation in managing pool water levels and rest assured that your pool has never been in better shape.